The Gully Hook was developed to make road gully handling and installation Safer, Quicker and Easier.
Together with the Gully Grab they provide a complete handling solution to offloading and moving Gullies which ensures no manual handling or working at height during offload.
The Gully hook is simple to use and has no working mechanical parts. Key features include:
- Two optional lifting points, one for DN375mm sizes and one for DN450 mm sizes.
- Safety Chain ensures secure, safe handling.
- Lifts all heights of gully up to and including 1200mm.
- Safe Working Load of the Gully Hook is 350Kgs.
- Conforms to relevant EC directives for safety of machinery and CE marked accordingly.
This handy solution has been designed to fit snugly in the Gully spout without the need to remove the rodding eye cover or to damage the gasket.
The addition of a safety chain means that a full loop around the spout is made (see top photo on the right). Correct fitting, with the hook face flat to the inside wall, will ensure that the Gully Hook can never accidently become disengaged.
Construction site situations usually call for gullies to be stored on their side or back, this is mainly for stability as they are top heavy.
The Gully Hook has been especially designed to lift gullies from the laid down position to an upright position till hanging plumb.
An easier and more accurate installation can be achieved with the gully hanging plumb as this position ensures correct alignment first time and with no damage to the gasket.
The Gully Hooks simple and robust design means it should provide many years of working life without the need for service or repair. It also offers a safer solution of lifting and handling gullies than most traditional methods.
Some Traditional Methods
Methods shown in the photographs below could be considered unsafe and will damage gaskets.
Is your site using these methods?
Why not opt for a quicker, safer, easier and more cost effective solution with the Stanton Bonna/Probst Gully Hook?
The Gully Hook and Gully Grab were designed and are the intellectual property of one of Europe’s leading precast concrete producers and are manufactured by one of Europe’s leading lifting equipment manufactures.
Cutaway of Gully Hook inside gully
Gully Hook lifting
Gully hanging plumb
Email email@example.com or call us on 0115 944 1448